Victoria 60 Round Reservoir with Water Feature Grid

The Victoria Pond is a strong black plastic tub suitable as a small pond or strong enough to act as a reservoir for water features. The Victoria Pond can be sited above or below ground. It includes a galavnised grid capable of holding a water feature weighing up to 150kg per m2. Dimensions 59cm x 36cm, holds 90 litres. To buy the Victoria 60 Pond without the grid click here

Optional Extras:

• Pump Access Cover Insert piece
• Libel Xtra 900 pump with 2 year Guarantee, for features up to 60cm tall, and even cheaper than our normal bargain price! (tick the box to select)
• Pond Hose, 3 metres of 19mm hose to connect your pump to the water feature (tick the box to select)
• Hose cock for 19mm hose, this is placed anywhere between the pump and feature so that water flowing to the feature can be adjusted easily (tick the box to select)
• other pumps are available at a discount if bought at the same time as a reservoir and grid, please ring

Tip: If used for a water feature this should be stood centrally to distribute the weight evenly. This Victoria Pond is supplied with a very strong galvanised grid (either a Round Grid or Square Grid 60cm x 60cm) to support a water feature (maximum weight 150kg per m2).  For heavy features it is important to take the weight off the pond by building up a column of bricks or blocks under each corner of a square grid, or if using a round grid, build the columns inside the pond. Hide exterior supports with screening, log roll or sink the whole lot into the ground. 

The grid is hidden with cobbles, rocks, paddle stones etc. There is a square opening in the grid to provide access for servicing the pump. A separate cover is available to fit this access point or it can be covered with a large rock or slate

Normally Next Day delivery to most UK postcodes if ordered before 12 noon (Mon - Thurs)