The Victoria 112 is a strong black plastic tub suitable as an easy pond or strong enough to act as a reservoir for water features. Can be sited above ground if used as a pond, best placed in ground if it is to support a heavy water feature. Dimensions 110cm x 35cm, holds 275 litres. Supplied with a round or square grid. The round grid is made to fit, the square grid leaves a 6cm gap at each of the four sides and the corners overhang the reservoir
Tip: The water feature should be stood centrally to distribute the weight evenly. This Victoria Pond is supplied with a very strong galvanised grid (either a Round Grid or Square Grid 100cm x 100cm) to support a water feature (maximum weight 150kg per m2). For heavy features it is important to take the weight off the pond by building up a column of bricks or blocks under each corner of a square grid, or if using a round grid, build the columns inside the pond, there will still be room for the pump. Hide exterior supports with screening, log roll or sink the whole lot into the ground.
The grid is hidden with cobbles, rocks, paddle stones etc. There is a square opening in the grid to provide access for servicing the pump. A separate cover is available to fit this access point or it can be covered with a large rock or slate
Normally Next Day delivery to most UK postcodes if ordered before 12 noon (Mon - Thurs)
Product 15/27
Current Reviews: 1
