The Airedale Kennel is a strong, well designed dog kennel with the kennel and the run side by side. This makes the combined kennel/run a wide unit rather than long as with the Pointer Kennel. This kennel and run have a pent roof with a gentle slope from front to back. The height at the front is 160cm (5'5"). Includes seperate doors into the kennel and into the run and a sliding bob hole so the dog can access the run. Both doors are fitted with pad bolts. Each kennel is supplied with a run which is the same dimensions front to back as the kennel but is available in variable widths from 150cm (5') up to 240cm (8'). The total price is obtained by adding the price of the kennel to the price of the run. Select the run length by clicking on one of the sizes below, by default the 150cm run is selected but you can deselect this and click on a larger size. The timber originates from well managed, sustainable forests and is pre-treated with a factory applied preservative base coat. The kennel will need a suitable base - see note on Base Preparation below. This kennel is made by a British manufacturer established in 1979, with a reputation for offering excellent value for money, quality and service
Specification:
Optional Extras
The price includes Vat, delivery within Yorkshire or Lancashire (unfortunately this item is not available outside these areas) and the erection of the building by experienced fitters at no extra cost. The customer needs to prepare a firm, level base before the fitters arrive (please carefully read the notes below on 'Base Preparation' and 'Aftercare' before placing an order). Delivery times vary from 2 - 4 weeks depending on the time of year and whether the item is available from stock, or has to be built to your specification (We can give you a more precise lead time if you contact us prior to ordering). The fitters will contact you approximately one week before delivery with a specific date.
Base Preparation
A flat, level base must be prepared before delivery. The best option is to have a concrete base, or to flag the area with paving slabs. If this is not possible the building can be sited on firm, level sand, soil, grass or gravel with the addition of a set of tanalised bearers (these are strong timbers spaced at intervals under the building). Some customers may choose to have bearers even on a concrete or flagged base to raise the building by a few inches giving improved airflow. Bearers are available as an optional extra and can be brought by the fitters when they come to erect the building. In very exceptional cases Should the fitters consider a base to be unsuitable it will be necessary to levy a surcharge of £50, payable prior to any return visit
Aftercare
All buildings are treated with a factory base coat but a further coat of good quality water repellant preservative is required immediately after erection (this service can be provided as an optional extra for £39, colours available are red cedar, teak or dark oak). Although these garden buildings are constructed with quality timber, as a natural product it is subject to climatic changes which can cause warping and splitting in extremes of temperature. This is a natural process and beyond our control and therefore is not covered by any guarantee. Similarly the roofing felt, although specifically designed for use on garden buildings, can occasionally ripple due to temperature changes, this is not due to a fault in the product and will not impede it's effectiveness
Product 3/9
